Kraft sac extensible vs standard : quand la prime en vaut la peine

Extensible sack kraft — Clupak being the historical brand, with several mill-specific equivalents on the market today — is mechanically creped in the wet end to give the finished sheet 4–8% elongation before break, against 2–3% for standard sack kraft. The premium price is real, and so is the production saving — but only if your filling line runs hot enough to actually exercise the elongation. Below 800 sacks per hour, you are usually paying for performance you don't use. Above 1,200, you are losing money every shift you keep the standard sheet on the unwinder.

What 'extensible' actually means on the COA

Specification sheets call it stretch, elongation at break, or simply E%. Mills measure it per ISO 1924-2, the same instrument that gives you tensile. The number you care about is CD (cross direction) elongation — that is the axis loaded when a valve sack is dropped on a pallet from filling height. Standard sack kraft delivers 2.0–3.0% CD elongation. Extensible variants deliver 4.5–7.5% CD elongation. The MD number rises too, but less dramatically — typically from 1.5% to 3.5%.

TEA is the variable that actually predicts burst rate

Elongation by itself is misleading. The variable that correlates with real-world sack survival is TEA — tensile energy absorption, the integral of force × elongation. A creped sheet has roughly twice the TEA of a standard sheet at the same grammage, which is why extensible kraft survives shock loads that pulverise non-extensible paper of identical tensile rating.

Quand l'extensible est rentable

• Cement and dry-mortar valve filling at 1,200+ sacks/hour: burst rate typically drops from 0.3–0.5% to 0.05–0.15%.
• Carbon black, talc and other dusty minerals: the higher TEA absorbs the impact shock of fast valve filling without seam blow-out.
• Long-distance export sacks: lower burst rate during ocean transit and forklift handling at destination port.
• Hot-fill applications (some food and chemical products): standard kraft loses tensile when warm; extensible holds.
• Open-mouth sacks dropped onto conveyors from height: the controlled elongation prevents handle and bottom failures.

Where standard sack kraft is still the right answer

• Bagged feed, grain, fertiliser and agricultural products at under 500 sacks/hour with manual or semi-automatic filling.
• Sacks for local distribution with light handling and no export leg.
• Inner plies of multiwall constructions where only the outer ply needs the elongation.
• Pinch-bottom sacks for non-dusty products where seal quality dominates the failure mode.

Grammage typically dispatched

Running the numbers on a real line

Take a typical European cement plant running a single 1,400 sacks/hour valve filler, 16 hours per day, 250 days per year. That is 5.6 million sacks per year. Lowering the burst rate from 0.35% to 0.10% saves 14,000 sacks — about 350 tonnes of cement that would otherwise be swept off the floor or rebagged downstream. At a typical European bulk cement price, the recovered product alone funds the extensible premium roughly three times over, before counting downtime avoided when a burst sack jams the conveyor.

What to ask your supplier

• CD elongation and MD elongation at break (ISO 1924-2).
• TEA in both directions (J/m²) — this is the figure of merit, not raw tensile.
• Burst index (ISO 2758) — minimum 3.5 kPa·m²/g for valve-filled sacks.
• Porosity in Gurley seconds — too tight and dusty product blows back at the valve; too open and finer grades sift through.
• Cobb 60 (ISO 535) — relevant for any application with surface moisture during storage or transport.
• Batch traceability and lot-to-lot consistency — variation in elongation is what causes intermittent burst events that nobody can debug.

Sourcing through WeePaper

We ship extensible sack kraft from European mills with consistent CD elongation, full ISO documentation per batch, and reel sizes calibrated to common European tubers and bottomers. Send us your filler model, sack format, product density and target throughput and we'll return two or three benchmarked grade options with sample reels for line trial before any tonnage commitment.